The Blue Ox OX2500D-CC is a ceiling-hung air cleaner built for heavy odor and VOC applications. After a washable mesh pre-filter and a high-efficiency bag filter, air passes through a 36 lb activated carbon after filter to polish lingering gases and odors. Straight-through airflow, a 4-way adjustable discharge, and a rugged 16-gauge cabinet deliver reliable performance with simple service access.
Heavy-duty odor & VOC reduction with a 36 lb activated carbon after filter.
3-stage path: washable mesh pre-filter → 95% bag → carbon after filter for polishing.
Locking hinged door for easy access and fast filter changes.
| AIRFLOW | 2,500 CFM |
| AIRFLOW PATH | Straight-Through |
| DIMENSIONS | 24" W × 26" T × 67" L |
| NOISE LEVEL | 62 dBA @ 5' |
| CABINET | 16 ga. Cold-Rolled Steel |
| INPUT POWER | 115V / 60Hz / 1PH · 10.2A · 950W |
| MOTOR / FAN | PSC Direct Drive · 3/4 HP |
| DISCHARGE | 4-way adjustable grille |
| HANGING WEIGHT | ~225 lbs. |
STAGE 1: WASHABLE MESH PRE-FILTER
24" × 24" × 4" | 35% Washable Mesh Pre Filter
Captures larger particulate to extend downstream media life.
STAGE 2: 95% 12-POCKET BAG FILTER
24" × 24" × 15" | 95% 12 Pocket Bag Filter
High dust-holding capacity with low resistance for steady airflow.
STAGE 3: CARBON AFTER FILTER
24" × 24" × 12" | 36 lb Carbon After Filter
Activated carbon for heavy odor & VOC control.
Filter Change Gauge: Magnehelic Pressure Gauge 0-2" W.C.
SKU: BOP-MAG02
Dual L-Brackets - Underside brackets for Wall Mounting
SKU: BOP-LBRKTS
Eyebolts4 eyebolts pre-installed on the unit
SKU: BOP-EYEBLTS
Mounting Kit Chain, Q-Links, & eyebolts
SKU: BOP-MTGKIT
Silencer Retro Kit with larger louver - field install
SKU: BOP-2530SIL-RK
CleanLeaf's warranty is for the authorized distributors and ultimate purchasers (end users) of its products.
CleanLeaf warrants its products for two years from ship date and covers defects in both material and workmanship. Labor and freight are not covered under the warranty policy.
Any claims made pursuant to this warranty by the customer or distributor are conditional upon CleanLeaf's inspection of the product upon which the claim is made.
Products claimed under this warranty shall be shipped directly to CleanLeaf, at CleanLeaf's expense, unless otherwise stated. Approval must be issued for the warranty claim before such a shipment will be accepted. Should the claim be approved, CleanLeaf will either replace the defective product or issue a credit/repayment.
This warranty is void on all CleanLeaf products if any product has been misused, mistreated, or used other than for its specified application.
Find quick answers to the most common questions about our services, solutions, and process.
See All FAQsAir filtration system selection depends on:
• Room size (cubic footage)
• Air changes per hour (ACH)
• Type of contaminants (dust, smoke, mold, odors, VOCs)
• Required filtration level (bag filter %, carbon weight, HEPA, etc.)
Our team evaluates airflow dynamics and contaminant load to recommend a properly sized solution — not just a box with a fan.
Most CleanLeaf and Blue Ox models operate between ~48–66 dBA, depending on airflow setting and unit size.
Lower-speed settings and optional silencers are available for sound-sensitive environments.
Most units are plug-and-play on standard 115V power and include suspension or bracket mounting options.
For larger commercial or industrial applications, we may recommend airflow planning to optimize circulation patterns.
Filter life varies by environment and contaminant load. Typical ranges:
• Pre-filters: 1–3 months
• Carbon media: 6–12 months
• HEPA or high-efficiency bags: 6–18 months
Higher particulate or odor loads may shorten intervals.
Our systems are engineered to capture and control:
• Dust
• Smoke
• Mold and Mildew
• Odors and VOCs
• Fine particulate
Filtration stages may include pleated pre-filters, high-efficiency bag filters, HEPA media, and activated carbon depending on the application.
CleanLeaf offers a 2-year warranty covering defects in materials and workmanship for authorized distributors and end users.
To make a claim, you must get approval first. Approved claims are resolved with a replacement or credit/refund. The warranty is void if the product was misused or used outside its intended purpose.
We also provide ongoing support and access to replacement filters.
If you would like to speak with one of our product experts about our products, pricing, or to get a system estimate, please call or email us using the contact information below. If you want pricing for a specific product or would like to be contacted by a product expert, please use the Request a Quote Form. If you need support with an existing order, please visit the Contact Us page.
Please share a few details below, and a product expert will contact you promptly. To accelerate the process, please provide as much detail about our application as possible (EX: type of contaminant (dust, odor, fumes...), size of your space, ceiling height...).