The OX1100-CC adds an activated-carbon module to the proven OX1100 platform—pairing odor/VOC adsorption with efficient particulate capture. It’s compact, ceiling-hung, and easy to service for applications where odors/VOCs are the main concern. Straight-through airflow and a 4-way adjustable discharge help you direct clean air where it’s needed most.
Airflow max 825 CFM (carbon/VOC focused configuration).
18 lb. carbon canister targets persistent odors and VOCs.
Washable foam pre-filter + 95% 6-pocket bag filter for particulates.
| AIRFLOW | 825 CFM |
| AIRFLOW PATH | Straight-Through |
| DIMENSIONS | 20" W × 15" T × 44" L |
| SOUND LEVEL | 48 dBA @ 5' (High) |
| INPUT POWER | 115V / 60Hz / 1PH · 3.5A · 500W · 10' cord · Two-speed switch |
| DISCHARGE | 4-way adjustable grille |
| FINISH | Chemical-resistant powder coat |
| MOTOR / FAN | PSC Type 1/4 HP direct drive (thermal overload) |
| HANG WEIGHT | 120 lbs. |
STAGE 1: FOAM PRE-FILTER
15" × 20" × 1" | Washable Foam Pre-Filter
Captures larger debris and extends downstream filter life.
STAGE 2: 95% 6-POCKET BAG FILTER
15" × 20" × 12" | 95% 6-Pocket Bag Filter
High-capacity fine-particulate capture with low resistance.
CARBON MODULE: ODOR & VOC CONTROL
15" × 20" × 12" | 18 lb. Carbon Canister
Activated carbon targets persistent odors and VOCs.
Filter Change Gauge: Magnehelic Pressure Gauge 0-2" W.C.
SKU: BOP-MAG02
Dual L-Brackets - Underside brackets for Wall Mounting
SKU: BOP-LBRKTS
Eyebolts4 eyebolts pre-installed on the unit
SKU: BOP-EYEBLTS
Mounting Kit Chain, Q-Links, & eyebolts
SKU: BOP-MTGKIT
Silencer Retro Kit - Reduces Noise by 6-8 Decibels - field install
SKU: BO11-SILENCER-RK
CleanLeaf's warranty is for the authorized distributors and ultimate purchasers (end users) of its products.
CleanLeaf warrants its products for two years from ship date and covers defects in both material and workmanship. Labor and freight are not covered under the warranty policy.
Any claims made pursuant to this warranty by the customer or distributor are conditional upon CleanLeaf's inspection of the product upon which the claim is made.
Products claimed under this warranty shall be shipped directly to CleanLeaf, at CleanLeaf's expense, unless otherwise stated. Approval must be issued for the warranty claim before such a shipment will be accepted. Should the claim be approved, CleanLeaf will either replace the defective product or issue a credit/repayment.
This warranty is void on all CleanLeaf products if any product has been misused, mistreated, or used other than for its specified application.
Find quick answers to the most common questions about our services, solutions, and process.
See All FAQsAir filtration system selection depends on:
• Room size (cubic footage)
• Air changes per hour (ACH)
• Type of contaminants (dust, smoke, mold, odors, VOCs)
• Required filtration level (bag filter %, carbon weight, HEPA, etc.)
Our team evaluates airflow dynamics and contaminant load to recommend a properly sized solution — not just a box with a fan.
Most CleanLeaf and Blue Ox models operate between ~48–66 dBA, depending on airflow setting and unit size.
Lower-speed settings and optional silencers are available for sound-sensitive environments.
Most units are plug-and-play on standard 115V power and include suspension or bracket mounting options.
For larger commercial or industrial applications, we may recommend airflow planning to optimize circulation patterns.
Filter life varies by environment and contaminant load. Typical ranges:
• Pre-filters: 1–3 months
• Carbon media: 6–12 months
• HEPA or high-efficiency bags: 6–18 months
Higher particulate or odor loads may shorten intervals.
Our systems are engineered to capture and control:
• Dust
• Smoke
• Mold and Mildew
• Odors and VOCs
• Fine particulate
Filtration stages may include pleated pre-filters, high-efficiency bag filters, HEPA media, and activated carbon depending on the application.
CleanLeaf offers a 2-year warranty covering defects in materials and workmanship for authorized distributors and end users.
To make a claim, you must get approval first. Approved claims are resolved with a replacement or credit/refund. The warranty is void if the product was misused or used outside its intended purpose.
We also provide ongoing support and access to replacement filters.
If you would like to speak with one of our product experts about our products, pricing, or to get a system estimate, please call or email us using the contact information below. If you want pricing for a specific product or would like to be contacted by a product expert, please use the Request a Quote Form. If you need support with an existing order, please visit the Contact Us page.
Please share a few details below, and a product expert will contact you promptly. To accelerate the process, please provide as much detail about our application as possible (EX: type of contaminant (dust, odor, fumes...), size of your space, ceiling height...).