Controlling odor in and around your facility is a constant challenge. The CleanLeaf Odor Series was specifically
engineered for cultivators to help eliminate the odor of even the most potent plants - with extra filters to help combat
contaminants. Focus on your grow without worry of odor complaints or mold outbreaks.
Each unit filters approximately 15,000 cubic feet. In order to create the proper air pattern, we always recommend placing two units.
2000 CFM airflow (Straight Through).
112 lbs. total activated carbon (16 canisters).
Minimal maintenance (hinged door filter access, filter change indicator).
| ACFM | 2000 CFM |
| AIRFLOW | Straight Through |
| SOUND LEVEL* | 65 dBA @ 5' (on high) |
| CABINET SIZE | 26"W x 28"T x 64"L |
| CABINET MATERIAL | 16 gauge Cold Rolled Steel |
| CABINET FINISH | White, Light Reflective Polyurethane |
| MOTOR | PSC Type 3/4 HP Direct Drive |
| INPUT POWER | 115V 60Hz 1PH |
| RUNNING AMPS | 9.5A |
| GRILLE/LOUVER | 4-Way Adjustable Blades/Fins |
| HANG WEIGHT | 522 lbs. |
| WARRANTY | 2 Years |
*Noise level measured at typical operating speed
STAGE 1: PLEATED PRE-FILTER
26" × 26" × 4" | 35% Efficient Pleated
Captures larger particulate before the carbon stage.
STAGE 2: ACTIVATED CARBON CANISTERS
(16) 7 lb. Canisters | 112 lbs. Total Activated Carbon
High-mass carbon adsorption for odor and VOC reduction.
STAGE 3: PLEATED AFTER-FILTER
26" × 26" × 2" | 35% Efficient Pleated
Final filtration stage before recirculation.
CleanLeaf's warranty is for the authorized distributors and ultimate purchasers (end users) of its products.
CleanLeaf warrants its products for two years from ship date and covers defects in both material and workmanship. Labor and freight are not covered.
Any claims made pursuant to this warranty by the customer or distributor are conditional upon CleanLeaf's inspection of the product upon which the claim is made.
Products claimed under this warranty shall be shipped directly to CleanLeaf, at CleanLeaf's expense, unless otherwise stated. Approval must be issued for the warranty claim before such a shipment will be accepted. Should the claim be approved, CleanLeaf will either replace the defective product or issue a credit/repayment.
This warranty is void on all CleanLeaf products if any product has been misused, mistreated, or used other than for its specified application.
Find quick answers to the most common questions about our services, solutions, and process.
See All FAQsAir filtration system selection depends on:
• Room size (cubic footage)
• Air changes per hour (ACH)
• Type of contaminants (dust, smoke, mold, odors, VOCs)
• Required filtration level (bag filter %, carbon weight, HEPA, etc.)
Our team evaluates airflow dynamics and contaminant load to recommend a properly sized solution — not just a box with a fan.
Most CleanLeaf and Blue Ox models operate between ~48–66 dBA, depending on airflow setting and unit size.
Lower-speed settings and optional silencers are available for sound-sensitive environments.
Most units are plug-and-play on standard 115V power and include suspension or bracket mounting options.
For larger commercial or industrial applications, we may recommend airflow planning to optimize circulation patterns.
Filter life varies by environment and contaminant load. Typical ranges:
• Pre-filters: 1–3 months
• Carbon media: 6–12 months
• HEPA or high-efficiency bags: 6–18 months
Higher particulate or odor loads may shorten intervals.
Our systems are engineered to capture and control:
• Dust
• Smoke
• Mold and Mildew
• Odors and VOCs
• Fine particulate
Filtration stages may include pleated pre-filters, high-efficiency bag filters, HEPA media, and activated carbon depending on the application.
CleanLeaf offers a 2-year warranty covering defects in materials and workmanship for authorized distributors and end users.
To make a claim, you must get approval first. Approved claims are resolved with a replacement or credit/refund. The warranty is void if the product was misused or used outside its intended purpose.
We also provide ongoing support and access to replacement filters.
If you would like to speak with one of our product experts about our products, pricing, or to get a system estimate, please call or email us using the contact information below. If you want pricing for a specific product or would like to be contacted by a product expert, please use the Request a Quote Form. If you need support with an existing order, please visit the Contact Us page.
Please share a few details below, and a product expert will contact you promptly. To accelerate the process, please provide as much detail about our application as possible (EX: type of contaminant (dust, odor, fumes...), size of your space, ceiling height...).